A sütik segítségével igyekszünk a legjobb vásárlási élményt biztosítani, minden, ezzel járó előnnyel együtt. Ezek közé tartoznak például a a személyre szabott hirdetések és akciók, valamint a preferenciák mentése. Ha ezzel nincsenek fenntartásaid, kérjük, egyszerűen csak add meg beleegyezésed a sütik preferenciákat, statisztikákat és marketinget érintő használatára a „Rendben!” gombra kattintva. (összes mutatása). A jóváhagyásodat bármikor visszavonhatod a sütik beállításainál (itt).
Megjegyzés: Mivel szeretnénk megakadályozni, hogy az értékelések szóbeszéden, hiányos ismereteken alapuljanak, vagy rejtett reklámok legyenek, csak valós ügyfeleink számára tesszük lehetővé értékelések írását, akik valóban tőlünk vásárolták meg a terméket.
A bejelentkezést követően az ügyfélközpontban, a "Termékek értékelése" menüpont alatt megtalálsz minden terméket, amelyet lehetőséged van értékelni.
Sajnos hiba történt. Kérjük, később próbálkozz újra.
GG
Göran G. 21.10.2015
I bought this Lead Foot ABY to switch between - and mix together - the left and the right channel on my 22500 Loper's stereo output.
To test channel interference, I used the A and B 1/4" jacks as inputs in which I sent a 0 dB (1 kHz) signal. I connected one of the parallel 1/4" jacks as output to a HI-Z input on an Audio Interface to measure signal strength. There was no change in the signal on the selected channel, but there was a crosstalk of -28dB from the non-selected channel. When A and B input were linked together, the sum of the signals was +6dB.
The buttons are fitted with just 4 cm distance between them which means that you need to be a bit accurate not to press the wrong button by misstake. The advantage is that you can easily press both buttons at the same time if you need to.
When both A and B are active at the same time, both LEDs are illuminated. Therefore - if you forgot the previous A/B setting, you can not determine which of the A and B jacks that becomes active when the Y-connection is disabled. (This could have been encoded with the use of multicolor LEDs.) The LEDs are small and sits deep in the panel and is therefore a little difficult to read in bright light and/or at a large viewing angle, but mostly this is no problem.
There was no problem to get the 9V battery in and out of the box. The LEDs are activated whenever a plug is inserted in one of the "parallel" in/out jacks.
The Lead Foot ABY switch pedal does what it is meant to do. Feels robust, and has a good price
I bought this Lead Foot ABY to switch between - and mix together - the left and the right channel on my 22500 Loper's stereo output.
To test channel interference, I used the A and B 1/4" jacks as inputs in which I sent a 0 dB (1 kHz) signal. I connected one of the parallel 1/4" jacks as output to a HI-Z input on an Audio Interface to measure signal
I bought this Lead Foot ABY to switch between - and mix together - the left and the right channel on my 22500 Loper's stereo output.
To test channel interference, I used the A and B 1/4" jacks as inputs in which I sent a 0 dB (1 kHz) signal. I connected one of the parallel 1/4" jacks as output to a HI-Z input on an Audio Interface to measure signal strength. There was no change in the signal on the selected channel, but there was a crosstalk of -28dB from the non-selected channel. When A and B input were linked together, the sum of the signals was +6dB.
The buttons are fitted with just 4 cm distance between them which means that you need to be a bit accurate not to press the wrong button by misstake. The advantage is that you can easily press both buttons at the same time if you need to.
When both A and B are active at the same time, both LEDs are illuminated. Therefore - if you forgot the previous A/B setting, you can not determine which of the A and B jacks that becomes active when the Y-connection is disabled. (This could have been encoded with the use of multicolor LEDs.) The LEDs are small and sits deep in the panel and is therefore a little difficult to read in bright light and/or at a large viewing angle, but mostly this is no problem.
There was no problem to get the 9V battery in and out of the box. The LEDs are activated whenever a plug is inserted in one of the "parallel" in/out jacks.
The Lead Foot ABY switch pedal does what it is meant to do. Feels robust, and has a good price
Sajnos hiba történt. Kérjük, később próbálkozz újra.
Z
No difference between Lead ABY and other expensive brands
Zoka 25.04.2021
This is the very good ABY switcher. my opinion is there is no difference between Lead ABY and other expensive brands. The size of the Lead Foot ABY is just right for me. I can keep 2 guitars plugged in with the ability to quickly & noiselessly switch them out within seconds. At the end of the night, I just unplug it and it tucks away perfectly into my pedal board. Finally, it only takes a single AA battery which lasts a long time as long as you remember to unplug your cables. If you're in need of an excellent AB box, this is the one to get, especially for the price.
This is the very good ABY switcher. my opinion is there is no difference between Lead ABY and other expensive brands. The size of the Lead Foot ABY is just right for me. I can keep 2 guitars plugged in with the ability to quickly & noiselessly switch them out within seconds. At the end of the night, I just unplug it and it tucks away perfectly into my pedal board.
This is the very good ABY switcher. my opinion is there is no difference between Lead ABY and other expensive brands. The size of the Lead Foot ABY is just right for me. I can keep 2 guitars plugged in with the ability to quickly & noiselessly switch them out within seconds. At the end of the night, I just unplug it and it tucks away perfectly into my pedal board. Finally, it only takes a single AA battery which lasts a long time as long as you remember to unplug your cables. If you're in need of an excellent AB box, this is the one to get, especially for the price.
Sajnos hiba történt. Kérjük, később próbálkozz újra.
R
Affordable and solid ABY pedal
Rebombori 02.05.2025
The Lead foot ABY is a simple ABY pedal. Feels solid and the foot switches placement and style make it usable. I use footswitch toppers for extra surface and color coding.
I use the ABY pedal to combine together two signal paths that were split with the EHX Bass9. In this way, I can optionally add the pitched-down bass sound to the main overdriven guitar sound. It has worked quite well for my purpose, without noises or glitches.
This ABY pedal is mechanical, which makes it basically equivalent to switching patch cables on the fly. Depending on the application a more advanced solution (buffered line switchers) may be preferred.
The size is ok, taking less vertical space than other pedals. The access to the battery is not the easiest but fortunately the battery lasts long since it is only used for the LED lights.
In my experience, the main inconvenient is that the lights only turn off when there are no jacks connected to the A and B inputs. This makes it a bit inconvenient to use on a fixed set-up on a pedal board since you have to remember to connect and disconnect those jacks every time if you don't want the battery to drain when the pedal board is stored. An on/off switch or 9V connection would have been preferred.
The Lead foot ABY is a simple ABY pedal. Feels solid and the foot switches placement and style make it usable. I use footswitch toppers for extra surface and color coding.
I use the ABY pedal to combine together two signal paths that were split with the EHX Bass9. In this way, I can optionally add the pitched-down bass sound to the main overdriven guitar
The Lead foot ABY is a simple ABY pedal. Feels solid and the foot switches placement and style make it usable. I use footswitch toppers for extra surface and color coding.
I use the ABY pedal to combine together two signal paths that were split with the EHX Bass9. In this way, I can optionally add the pitched-down bass sound to the main overdriven guitar sound. It has worked quite well for my purpose, without noises or glitches.
This ABY pedal is mechanical, which makes it basically equivalent to switching patch cables on the fly. Depending on the application a more advanced solution (buffered line switchers) may be preferred.
The size is ok, taking less vertical space than other pedals. The access to the battery is not the easiest but fortunately the battery lasts long since it is only used for the LED lights.
In my experience, the main inconvenient is that the lights only turn off when there are no jacks connected to the A and B inputs. This makes it a bit inconvenient to use on a fixed set-up on a pedal board since you have to remember to connect and disconnect those jacks every time if you don't want the battery to drain when the pedal board is stored. An on/off switch or 9V connection would have been preferred.
Sajnos hiba történt. Kérjük, később próbálkozz újra.
s
Great piece of switcher
skudrupuznis 18.01.2022
I wanted to buy a cheap ABY switcher and I wanted to check this one out because the price is just so low. I works great, I actually cannot find any reason to buy a more expensive one except the only downside and also the only reason why I am not using it more frequently is just that the pedal is bit too big to squeeze on my pedalboard. My bad for not looking on the dimensions of it. Otherwise, a good buy.
I wanted to buy a cheap ABY switcher and I wanted to check this one out because the price is just so low. I works great, I actually cannot find any reason to buy a more expensive one except the only downside and also the only reason why I am not using it more frequently is just that the pedal is bit too big to squeeze on my pedalboard. My bad for not looking on the
I wanted to buy a cheap ABY switcher and I wanted to check this one out because the price is just so low. I works great, I actually cannot find any reason to buy a more expensive one except the only downside and also the only reason why I am not using it more frequently is just that the pedal is bit too big to squeeze on my pedalboard. My bad for not looking on the dimensions of it. Otherwise, a good buy.
