the t.bone Lucan System Complete Bundle
Bundle offer comprising
the t.bone Lucan System CC 200 RC
Condenser instrument microphone
- Easy installation with various instrument holders for many different instruments (not included)
- Flexible gooseneck 120 mm for easy alignment on the instrument
- Detachable cable with screw contact
- 3-pin mini XLR plug for use with t.bone wireless systems (also suitable for Sirus and AKG wireless systems)
- Polar pattern: Cardioid
- Frequency range: 30 - 20.000 Hz
- Sensitivity: -38 dB +/- 2 dB
- Max. SPL: 130 dB
- Signal-to-noise ratio: 71 dB
- Impedance 100 Ohm
- Distortion factor: < 1%
- Cable length approx. 2 m
- Incl. Windscreen, phantom power adapter (phantom power required) and hard case (with space for an optional holder)
- Dimensions of the hard case (L x W x H): 26 x 13 x 7 cm
the t.bone Lucan System CC 200 GH
Microphone Mount
- Guitar clip for the Lucan System CC 200 RC
- Suitable for clamping onto guitars or similar instruments with a thickness between 73 and 120 mm
the t.bone Lucan System CC 200 BH
Hardcase
- For the Lucan System CC 200 RC
- With space for all system components (microphone, phantom adapter, cable, 1x holder each GH, VH,CH, PH,MH,SH)
- Dimensions (L x W x H): 33 x 22 x 7 cm
the t.bone Lucan System CC 200 VH
Microphone Mount
- Violin clip for the Lucan System CC 200 RC
- Suitable for clamping to violins or similar instruments with a thickness of 32 to 50 mm
the t.bone Lucan System CC 200 CH
Microphone Holder
- Clarinet-clip for the Lucan System CC 200 RC
- For fixing on clarinets or similar instruments with a strong hook-and-loop tape up to a diameter of 65 mm
the t.bone Lucan System CC 200 PH
Microphone Mount
- Piano clip for the Lucan System CC 200 RC
- Suitable for fixing on pianos or similar instruments with strong magnets
the t.bone Lucan System CC 200 MH
Microphone Mount
- Multi-Clip for the Lucan System CC 200 RC
- Suitable for clipping onto cello, saxophone, trombone, cornet or similar instruments with a thickness up to 23 mm
the t.bone Lucan System CC 200 SH
Microphone Mount
- Tripod clip for the Lucan System CC 200 RC
- Suitable for screwing onto all stands with a standard 5/8" thread
disponibil din
August 2020
numărul articolului
500827
unitate de vânzare
1 bucată(ăţi)
Battery Powered
No
Directional Microphone
No
Stereo Pair
No
switchable lowcut
No
switchable pad
No
characteristic
cardoid
Clip-On Microphone
1
Condenser Microphone
1
Polar Pattern
Cardioid
Incl. Clamp
1
inkl. Clamp
1
Mai mult
-
the t.bone Microfoane cu Diafragmă Mică dintr-o ochire
-
Afişează Microfoane cu Diafragmă Mică în gama de preţ 750 lei - 1250 lei
-
Mergi la categoria de produse Microfoane pt. Chitare Acustice
-
Mergi la categoria de produse Microfoane pt. Flaut
-
Mergi la categoria de produse Microfoane pt. Clarinet
-
Mergi la categoria de produse Microfoane pentru Saxofon
-
Mergi la categoria de produse Microfoane pt. Trompetă, Corn, ETC
-
Mergi la categoria de produse Microfoane pt. Instrumente cu Coarde
-
Mergi la categoria de produse Microfoane cu Diafragmă Mică
-
Mergi la categoria de produse Microfoane pt. Tubă, Eufoniu, ETC.
-
Mergi la categoria de produse Microphones for Acoustic Piano
-
Mergi la categoria de produse Microfoane
-
Afişează detaliile producătorului pentru the t.bone
-
the t.bone Microfoane dintr-o ochire