Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
Na
Solid snake splitter
We used an MTS snake to install in the floor during a refurbishment 2.5 years ago. This means that if the XLR connections get damaged for any reason we can just buy this part again and replace them all without having to open the floor.
The quality of the cables is good, the connector is bulky and it certainly has done the job so far. There are two annoying points, the numbering is very small and the cabling can get tangled very easy. A little more cable management and the ability to really get the outputs further away would help. We have had to use an extension on one or two of the output lines in order to reach the correct places on the mixer.
Highly recommend if analogue snake is required in a similar situation.
The quality of the cables is good, the connector is bulky and it certainly has done the job so far. There are two annoying points, the numbering is very small and the cabling can get tangled very easy. A little more cable management and the ability to really get the outputs further away would help. We have had to use an extension on one or two of the output lines in order to reach the correct places on the mixer.
Highly recommend if analogue snake is required in a similar situation.
0
0
semnaleaza un abuz
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
M
GREAT LINE SOLOUTION
I got these to to run from xlr splitter units for seperate foh and mons sends, plug these in the splitter outs and have the multi pin ready to jump from one digital snake to another. Though it is a shame I cant find this product with the male and female tails the other way round 8/24 rather than 24/8 and a shorter (5m) multipin cable to connect them.
0
0
semnaleaza un abuz
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
m
Fantastic Multicore
This is my number one choice for any multicore setup. Having the ability to disconnect the tails from the main snake. It means that I can pack down whilst keeping the XLRs connected to the mixer, and reconnecting requires just a single connection to the rest of the snake. The modularity makes this a superb multicore!
0
0
semnaleaza un abuz
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
A
Well made and does the job
Well made and easy to use. I used it for the first time at a gig last Saturday and it worked like a dream. The clear numbering and input / output cable colours certainly help you to quickly connect everything to the mixing desk. I also like the flexibility the sssnake modular system provides, which allows you to connect different length cables and stage boxes as required to meet your needs / gig requirements.
0
0
semnaleaza un abuz
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
C
the sssnake MTS 248 - MS
For the money this is a very good piece of kit.
Amazingly each pair and the drain wire are wrapped in foil to reduce hum etc: You usually find this on more costly multicore.
See my review on the MTS 248 30 multicore ... you'll be very surprised.
Thanks Thomann.
Amazingly each pair and the drain wire are wrapped in foil to reduce hum etc: You usually find this on more costly multicore.
See my review on the MTS 248 30 multicore ... you'll be very surprised.
Thanks Thomann.
0
0
semnaleaza un abuz
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
G
Good but,,,
I just got this unit. the feel and build quality is good however I had issues with the labelling as when I insert the xlr plugs on my board the numbers are at the bottom. When the plugs are inserted even when viewed from the bottom, the numbers are not visible unless you unplug the xlr to view. I am also concerned that the numbers have started rubbing off.
0
0
semnaleaza un abuz
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
A
Good quality
Great way to connect to system easy to do.
0
0
semnaleaza un abuz
