Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
i
It's basic, it works, it is sturdy, and it is well priced.
The unit is STRONG, and that is probably the main thing that could be a concern when buying something so much cheaper than the competition. It's very quick to put together and adjust, and really I can't see any negatives. The centre piece does not need to be in place, and the end pieces can actually be set horizontal to hold your equipment a little higher up on the stand. Currently I use this to keep a modular system in a 104HP Make Noise skiff up to a comfortable level and angle for play with my guitar pedals, and I find it perfectly functional for the job (having it set a little higher by the way I mentioned before also leaves a small shelf underneath the synth unit, which is great for small patch cables, contact plugs, external mults, and other little bits that I want to occasionally grab).
I actually bought this originally to use as an angled, desktop pedalboard, and it works well enough for that but the modular system took over many of my effects so now the pedals I still use sit on a table around it.
For the price I would say it's a no-brainer if you think it will fit your gear, especially as it is slightly more flexible than the photos may immediately suggest.
I actually bought this originally to use as an angled, desktop pedalboard, and it works well enough for that but the modular system took over many of my effects so now the pedals I still use sit on a table around it.
For the price I would say it's a no-brainer if you think it will fit your gear, especially as it is slightly more flexible than the photos may immediately suggest.
1
0
semnaleaza un abuz
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
M
Great but not stackable with Elektron gear
These are excellent, rock solid stands in themselves, but the height between racks isn't sufficient to hold an Elektron Octatrack mkII - and presumably other Elektron gear - on the lower deck.
A shame - another cm or less would have made the difference. I can still place the OT on the upper deck, but if you were hoping to stack two Elektrons, it seems you're out of luck.
A shame - another cm or less would have made the difference. I can still place the OT on the upper deck, but if you were hoping to stack two Elektrons, it seems you're out of luck.
7
1
semnaleaza un abuz
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
n
QA Fail
I had to enlarge a couple holes and there was a spot that had been dinged and the paint had come off. Otherwise, it is as advertised, I got a couple with the extension, in order to organise my devices. I'd say it's better for either one big device or multiple small ones, otherwise you can end up with wasted unusable space.
All in all, I'll probably use it for a while, find it's pros and cons and use it as a blueprint to make something custom adjusted to the size of my devices.
All in all, I'll probably use it for a while, find it's pros and cons and use it as a blueprint to make something custom adjusted to the size of my devices.
1
0
semnaleaza un abuz
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
y
Much more solid than it looks
It's heavy, it's sturdy, it's durable!
Fits Digitone and Model:Cycles/Samples perfectly together.
Would like it to have some rubber feet, because it slides a little unless I put it on some fabric base (mouse pad in my case).
Fits Digitone and Model:Cycles/Samples perfectly together.
Would like it to have some rubber feet, because it slides a little unless I put it on some fabric base (mouse pad in my case).
0
0
semnaleaza un abuz
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
eN
Sturdy well built good value stand
I like this. It is strong and well built. Good points are it is all metal and has sliding lockable end-stops to hold your gear in place. They also supply soft rubber bits to protect the item you are supporting. Compare this quality to those rubbish massively over-priced 3D printed plastic stands with wooden dowels from another make! Roadworx have done a good job here and good value.
1
0
semnaleaza un abuz
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
T
Quality build
Very well built, sturdy construction, dividers can be adjusted for
equipment of different sizes.
p.s. it doesn't make sound, unless you hit it with stick:)
equipment of different sizes.
p.s. it doesn't make sound, unless you hit it with stick:)
0
0
semnaleaza un abuz
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
S
Le tank
Superbe, rigide, solide, bien conçu.
Utilisé avec un Digitakt et un Digitone, nécessite d'enlever les bords réglables, ne pose aucun problème à part si votre studio est sur un bateau. Livré avec des mousses de protection ! Dur de trouver mieux.
Utilisé avec un Digitakt et un Digitone, nécessite d'enlever les bords réglables, ne pose aucun problème à part si votre studio est sur un bateau. Livré avec des mousses de protection ! Dur de trouver mieux.
0
0
semnaleaza un abuz
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
A
Perfect
Perfect for all my stuff. Elektron a4 ar ot dt et digitone
En plus un tr6s et hapax
Tout au bout des doigts
En plus un tr6s et hapax
Tout au bout des doigts
0
0
semnaleaza un abuz
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
DJ
Perfect for holding my Digitakt and Digitone
at a ergonomically comfortable angle for extended time periods
0
0
semnaleaza un abuz
Din păcate a intervenit o eroare. Vă rugăm încercați din nou mai târziu.
a
GOOD!
I'm using it with Softube Console, it fits perfectly!
0
0
semnaleaza un abuz
