m
Produit très correct
Je ne travaille habituellement par avec cette marque mais ça m'a bien dépanné ! Et il fonctionne toujours, donc je trouve que pour le prix c'est très bien. La finition pourrait être un poil plus qualitative.
0
0
Zgłoś nadużycie
A
Works well.
I used this in a DIY bass build. Because it fits in a simple straight channel it is one of the simplest types of rod to fit, making it a good choice for amateur builders like myself. It is quite small in section, which would allow for a slim neck if desired. It does require some care to keep glue out of the exposed screw threads when installing the fingerboard, and it might be a good idea to apply some lubricant to the threads before installing.
The adjusting nut is plain steel rather than plated. This is not a problem in use, but I prefer to use a cover over the adjustment cavity rather than leaving it on view. It is a dual action rod which could be used to add relief as well as to reduce it. In practice, I have never needed to add relief to a neck, but it is reassuring to have that capability.
The adjusting nut is plain steel rather than plated. This is not a problem in use, but I prefer to use a cover over the adjustment cavity rather than leaving it on view. It is a dual action rod which could be used to add relief as well as to reduce it. In practice, I have never needed to add relief to a neck, but it is reassuring to have that capability.
1
1
Zgłoś nadużycie
WB
Perfect!
Does exactly what it should. Good build quality and turns easily. I routed a 6.3mm wide slot, 10mm deep and it fitted perfectly. It probably would have squeezed into a 6mm wide slot but I found the 6.3 cutter first. No room for complaints here, it works perfectly. I probably could have found it a little cheaper on Ebay but I tend to trust Thomann more when I want quality and reliability and a fast delivery. Very happy. 5 stars all round. (again!) :)
2
0
Zgłoś nadużycie
A
simple to use, sturdy and dependable.
I've used this item dozens of times... never had troubles. Easy to install and sturdy. Would be nicer if finished with something that could contrast rust but at this price absolutely nothing bad can be said!
1
0
Zgłoś nadużycie
Nt
First scratch build
This trussrod went to my first scratch build , it's a very good quality and after a year I have no problem
0
0
Zgłoś nadużycie
S
Does what it should!
Does exactly what it should, I used this in my custum built 32" scale bass about 2 years ago and it's still holding up strong. I don't know if this is down to the neck, truss rod, tuners, strings or a combination of all but I very very rarely have to tune it unless I accidentally knock the tuning peg. Happy all around with this truss rod anyway.
0
0
Zgłoś nadużycie
GN
Very good
Very satisfied with this trussrod. It is very well made and it responds very well.
0
0
Zgłoś nadużycie
