C
bad product
its only true purpose is to prevent against rack rash, it does not isolate equipment from each other, rather it isolates the rack equipment from the rack rails, so if 1 unit is causing hum this will transfer along each unit as their faceplates arent isolated
the screws dont fit my adam hall rack or gator case, it comes with a soft adapter for smaller screws
you have to cut the pieces out of their molds which isnt too difficult, but takes some accuracy to get them looking smooth with no bits sticking out.
the rubber/plastic warps/goes out of shape and shift position before you have the screws tightened, its difficult to gauge when its tight enough, when it feels tight your left with a misshapen piece
I dont normally right reviews straight after using a product but was so let down by these that I felt the need to write a review. some old bicycle inner tube would work better, or 2 plastic washers per screw would achieve the same
the screws dont fit my adam hall rack or gator case, it comes with a soft adapter for smaller screws
you have to cut the pieces out of their molds which isnt too difficult, but takes some accuracy to get them looking smooth with no bits sticking out.
the rubber/plastic warps/goes out of shape and shift position before you have the screws tightened, its difficult to gauge when its tight enough, when it feels tight your left with a misshapen piece
I dont normally right reviews straight after using a product but was so let down by these that I felt the need to write a review. some old bicycle inner tube would work better, or 2 plastic washers per screw would achieve the same
1
0
Zgłoś nadużycie
S
Your rack deserves the best!
Your rack deserves the best.
If you are a pro you don't need my advice, you know what you'll do. But for the rest of us who build a rack I'll tell you that, this set is a must for your rack.
You have spend a lot of money to buy audio hardware devices, you want the best for your sound so the last thing you want is hum from ground loops created between 19" devices via the metal rails.
Here comes the "Adam Hall 5635 Humfrees M6".
Consists of (4) M6 screws, (4) Insulators and (4) Spacers this is a set for one device. In a very good quality it'll give insulation to your rack against ground loops and protection to the front panels of your devices against assembly damage. Also looks nice aesthetically.
Coming in a good price, don't even thinking to don't make this buying.
If you are a pro you don't need my advice, you know what you'll do. But for the rest of us who build a rack I'll tell you that, this set is a must for your rack.
You have spend a lot of money to buy audio hardware devices, you want the best for your sound so the last thing you want is hum from ground loops created between 19" devices via the metal rails.
Here comes the "Adam Hall 5635 Humfrees M6".
Consists of (4) M6 screws, (4) Insulators and (4) Spacers this is a set for one device. In a very good quality it'll give insulation to your rack against ground loops and protection to the front panels of your devices against assembly damage. Also looks nice aesthetically.
Coming in a good price, don't even thinking to don't make this buying.
0
0
Zgłoś nadużycie
s
Quite good
I have used these in many racks with both M5 and M6 screws. These ARE compatible with both M5 and M6 screws because adaptors are provided for M5 screws.
As noted by another reviewer the can get mis-shapen if you are not careful, but this has only been a cosmetic problem for me.
As for isolation, they have worked every time for me (tested). I have not had trouble keeping the faceplates isolated. Important: when testing for isolation/continuity, remember to unplug all of the power cables from power distribution unit to rack devices. Otherwise the meter will indicate continuity, since the devices are joined through the PE/ECC conductor of each piece of gear (and this is how it must be for safety - NEVER cut a ground/PE/ECC conductor.
As noted by another reviewer the can get mis-shapen if you are not careful, but this has only been a cosmetic problem for me.
As for isolation, they have worked every time for me (tested). I have not had trouble keeping the faceplates isolated. Important: when testing for isolation/continuity, remember to unplug all of the power cables from power distribution unit to rack devices. Otherwise the meter will indicate continuity, since the devices are joined through the PE/ECC conductor of each piece of gear (and this is how it must be for safety - NEVER cut a ground/PE/ECC conductor.
0
0
Zgłoś nadużycie
M
Product is fine but a few quality issues
I bought about a dozen of these to try and help deal with hum issues from my rack gear. For the most part they are effective, but at times the installation is troublesome and the the plastic that wraps around the rack ears is prone to breaking. In addition, the heat shrink around the screws can either come loose or isn't secured properly to the screw, so a heat gun is required in the event anyone has similar issues.
0
0
Zgłoś nadużycie
N
Too weak
Not happy at all.
Really bad quality.
the plastic layer is really too thin and breaks just as soon as you bend them.
I ordered 10 packs of 4 and I have half that left in the trash ...
Really bad quality.
the plastic layer is really too thin and breaks just as soon as you bend them.
I ordered 10 packs of 4 and I have half that left in the trash ...
0
0
Zgłoś nadużycie
H
Adam Hall saved us from unwanted noise.
If you use racks, these are for you.Put them on every single rack and all the hum will dissapear.Just simple.
0
0
Zgłoś nadużycie
D
A must have accessory if you have multiple units in the rack !
I was struggling with electrical noise/buzz transferring from my 8ch pre to my audio interface. The noise was gone after installing these humfrees !
Recommended !
Recommended !
0
0
Zgłoś nadużycie
A
While these haven't made any major improvement to my sound or skills, they are nice and I would buy again.
These isolating equipment and also protect from rack rash.
These isolating equipment and also protect from rack rash.
0
0
Zgłoś nadużycie
A
Probably works - but be wary of screw size!
Please note that these are not the standard rack size, at least not same size as in any cheaper small rack or rack case I've used... just take care so that your actual rack is for M6 type screws.
0
0
Zgłoś nadużycie
BW
Insulation breaking when bent.
Low quality rubber. Breaking when bent. Installation process failed.
0
0
Zgłoś nadużycie